GA615A red edge denim looms is a new type of color weaving machine based on 1515A structure with features of simple structure,easy operation and maintenance,and most of the parts and components are ex-changeable.
This GA615A red edge denim looms can be used for various fabric with cotton , synthetic yarn ,blended yarn etc. it's the only 2X4 multi-box cotton loom.
GA615A Red Edge Denim Looms Technical Features:
(1)Type: Under picking type, multi-shuttle-box, automatic stop, manual weft replenishing
(2)reed space-56"63"75"
(3)hand type:R&L
(4)Max.space of warp: 130cm(56") ,147cm(63"), 177cm(75")
(5)Angle between reed and shuttle plate:86°36¹
(6)Crank shaft speed:110-120rpm
(7)Device system: clutch driven by motor with triangle type belt
(8)Motor model: model Fo-53-6N: 0.8Kw .960r/min.
(9)Shuttle box type: 2×4 multi- box.
(10)Shuttle box movement: edentulous gear lifting shuttle box movement.
(11)Shuttle box switch: steel board control, random even shuttle box switch.
(12)Save steel board: utilize veering of aperture or imperforate control panel on one side, control 16, 32 or 64 shuttles by the other side.
(13)Shedding device: double tappet shedding(dobby shedding Max.14 frames)
(14)Beating-up motion: warp yarn protecting readsliding beating-up
(15)Let off motion : warp feeding automatically positively or semi-positively, swelling strength-compensated warp feeding.
(16)Rolling type: seven teeth interval rolling, max rolling dia: 300mm
(17)Weft stop motin side fork or weft feeler without weft,machine stop.
(18)Shuttle: length:370mm×width 44.5mm×height 33.5mm
(19)Angle: 86°30. Left and right type.
(20)Weft pipe: length 195mm× exterior warp
(21)Dia: 12.5mm,common weft pipe, with weft inspection groove.
(22)Outline reed: length: 1394mm(56") 1568mm(63") 1873mm(75") .
(23)Heald length: 305mm. or 330mm
(24)Warp stop piece: length 120mm×width 11mm×thickness 0.2mm
Our Service:
1) Provide 24-hour service hotline.
2) Reply and find out solution within the shortest time according to customer’s requirement.
3) Provide on call service to help customer solve problems.
4) Provide free of machine installation as well as commissioning, and inform customer how to do the machine maintenance.
5) Prepare customer’s feedback tracking within one week after machine installation until meet customer’s satisfaction.
6) Provide one year guaranty and lifetime maintenance.
FAQ:
1. Q: How is the after sales service?
A:We provide 1 year guaranty and technical support lifetime.
2. Q: Is it difficult to install the machine?
A: The work shop should prepare full facility such as power and air compressor. For the further problems come out, we can provide video
instruction as well.
3. Q: What’s the machine lead time?
A: For the standard machines, we can delivery within 25 days. If it is customized by customer(OEM), the lead time is 35-55 days.