Introduction of Bandage Mask Machine

Bandage mask machine works by ultrasonic welding. 

Work process of bandage mask machine

1. Set a conveying device on the machine table, and import the semi-finished masks from the conveying device.

2. The mask machine carries out the drawing tube wrapping on the semi-finished mask, and the ultrasonic flower wheel pressing operation.

3. The mask machine cuts off the bandage of the semi-finished mask and outputs the finished mask.

Features of bandage mask machine

a. The frame of the bandage mask machine is made of aluminum alloy and stainless steel, which is light and beautiful and does not rust.

b. The bandage mask machine can automatically count, which can effectively control the production efficiency and production schedule.

c. The band-type mask function can be controlled by frequency conversion, and the running speed of the equipment can be adjusted according to actual needs.

d. The bandage-on mask machine feeds through the pull cylinder, the positioning is more accurate, the width of the raw material can be controlled to a minimum, and the cost is saved.

e. The length and size control of the bandage mask machine is uniform, with a deviation of ± 1 mm, which can effectively control the length of the finished product.

f. The degree of automation of the bandage mask machine is high, and the requirements on the operating staff are low, only the unloading and finishing of the finished product are required.

g. Band-type mask machine adopts ultrasonic Taiwan system, Japanese transducer, stable performance and convenient operation.