GA615ZP Velveteen Automatic Shuttle Changing Loom Application and Features

A loom that replenishes the weft with automatic shuttle changing. This kind of loom can save the time of manual shuttle changing, reduce the labor intensity of the operator and increase the stand ability of the shifter, so that the productivity of the loom and the labor productivity are improved. The working width of the automatic shuttle loom has a variety of 105-280 cm. It can weave all kinds of fabrics with pure or blended yarns. The automatic shuttle loom was developed by the Japanese Toyota Sakichi in 1926 on the basis of predecessors, and entered commercial production after continuous improvement. China began to adopt it in the early 1930s, and set up factories in the mid-1940s, and was widely adopted by cotton weaving mills. The automatic shuttle changing mechanism is composed of four parts: induction, shuttle library, shuttle box, and shuttle pushing mechanism. When the weft of the shuttle is about to run out, the shuttle pushing mechanism on the side of the shuttle is induced by the probe on the switch side to push the shuttle with the shuttle into the shuttle box from the bottom of the shuttle magazine horizontally, and the shuttle with the weft already used up It is pushed out from the back of the shuttle box to complete the shuttle changing action. GA615ZP Velveteen Automatic Shuttle Changing Loom is your good choice.